How to design tatami tatami decoration design step

2022-07-22
  • Detail

Every space in the house needs careful use and has its own significance. In the process of home decoration, there are many places that we can change with a little design. Many people know that the floating window can be transformed into tatami. Now let's see how to design tatami and the steps of tatami decoration design

tatami decoration design steps

1. First make the ground wooden platform

the platform is a high and off the ground spatial framework, usually 15 to 40 cm high. Generally, the lower part of the platform less than 30 cm can not be used for storage, while the lower part of the platform more than 30 cm can be used for storage. Platforms less than 15 cm are generally made of 3*4 wooden keels “ Well ” Word structure, which is paved with wood board or solid wood board, and tatami is placed on the paved surface

platform storage refers to that the lower part of the platform is made into a multiple box structure, which can store and store items, etc. this platform is a box structure, with a height of more than 30 cm. The floor structure space is determined according to the size of the room and the layout of tatami, so that it is convenient to use. Usually, there is a box under a tatami. It is better to open the tatami and see the items. Most of the materials used for the platform are wood board and solid wood finger joint board. The choice of materials is based on your budget

2. After the platform structure and materials are determined, we start to build the platform

first mark the horizontal line at the upper and lower 1.2m of all the walls of the room. With this basic horizontal line, we can ensure that our floor is flat. Then make all boxes according to the structural drawing of the platform. The stability of the platform structure is the guarantee for long-term use in the future. The vertical plate in the box is the key to load-bearing, so the vertical plate can be the best one. If the plate is not long enough, it needs to be spliced, and the splices should be strengthened. In short, the vertical plate of the box must be stable and solid. It is best to use 2x3 wood strips and self tapping screws between the box bottom plate and the vertical plate. The bottom plate is also for better reinforcement of the box

3. After the box is placed in place, start to connect with the wall

the method is to use wood (large core board) to open it into 10— The strip board with a width of about 15 cm is laid along the edge of the platform, that is, the structure of the falling edge. The falling edge has three functions: first, to fix the relationship between the box and the wall; second, the protective frame will be placed on the falling edge; third, after the tatami is lifted, it can be directly placed on the wide falling edge, which does not need to move the whole tatami, making it convenient for users to operate

the tatami protective frame is placed on the falling edge. The role of the protective frame is to protect the edges and corners of the tatami from damage or collapse in future use, and to ensure that the tatami placement space is a regular space, referred to as “ Regulatory party ”. The manufacturing method of the protective frame is to surround the edge of the box with plates. The interior of the enclosed protective frame is required to form a horizontal and vertical rectangular regular space, which is conducive to the good effect after the installation of tatami

the height of the protective frame is the thickness of the tatami, and the width of about 5 cm is beneficial. Here, it should be emphasized that the width may not be a fixed value. If the flatness of the wall surface is poor, it may even be the big and small end (the big and small end is what we usually say that the sizes of the two ends of the wall surface are inconsistent), then in order to ensure the spatial rules in the protective frame, the width of the protective frame is a randomly varying size. Therefore, before making the protective frame, we need to set out with ink bucket on the falling edge. The frame is made according to the line, and the cut curve is straight. The floor cover plate is above the box, which is the bearing layer of tatami. Generally, the finger joint plate is opened into 10 cm wide strips for interval arrangement, so it is also called row frame splicing. The advantage of the row frame is that when you open the tatami, you can see the objects in the box, and the row frame is conducive to tatami breathing and removing moisture. The size of tatami cover plate corresponds to the size of tatami

武汉妇科医院

天津男科医院

昆明外阴白斑医院

广州肿瘤医院

Copyright © 2011 JIN SHI